Bronze-fitted Turbine Pump - 4P916

Bronze-fitted Turbine Pump - 4P916

Dayton
SKU:
4P916
|
UPC:
190735331552
Availability:
In Stock

Log in for pricing

(No reviews yet)
Current Stock:
Description
Turbine Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 1 hp, Nameplate Voltage 115/230V AC, Shut Off Pressure (Maximum) 105 psi, Maximum Feet of Head 700 ft, Maximum Flow Rate 40 gpm, Flow Rate @ 10 psi 11.1 gpm, Flow Rate @ 20 psi 10.8 gpm, Flow Rate @ 30 psi 10.6 gpm, Compatible Intake Pipe Size 1 1/4 in, Compatible Discharge Pipe Size 1 in, Discharge Type NPT, Motor Type Capacitor-Start, Best Efficiency Head 130 ft
Additional Information
Country of Origin:
United States
HP:
1 hp
Voltage:
115/230
Wetted Materials:
Bronze Fitted, Cast Iron
Seal Material:
Buna-N/Carbon/Ceramic (Face)
Max. Pressure:
300 psi
Max. Dia. Solids:
25 Microns
Height:
8 1/16 in
Outlet:
1 in
GPM @ 30 PSI:
10.6
Phase:
Single
Impeller Material:
Bronze
Bearing Type:
Sealed Ball Bearing (Motor Bearing)
GPM @ 60 PSI:
10
Agency Compliance:
UL and CSA on Motor Only
Best Efficiency GPM @ Head:
8.4 gpm @ 130 psi ft
Housing Material:
Cast iron
Motor Enclosure:
Open Dripproof (ODP)
Impeller Type:
Regenerative Turbine
Includes:
Cast Casing
Frame:
56c
Inlet (In.):
1-1/4
Width:
6 3/4 in
Inlet:
1-1/4 in
GPM @ 20 PSI:
10.8
Max. Case Pressure:
300 psi
Manufacturers Warranty Length:
1 yr
Item:
Turbine Pump
Motor Type:
Capacitor-Start
Max. Specific Gravity:
1
Port Rotation:
90 Degrees Increments
Duty:
Continuous
GPM @ 75 PSI:
9.4
GPM @ 10 PSI:
11.1
Inlet Pressure:
200 psi
GPM @ 50 PSI:
10.2
GPM @ 100 PSI:
9.0
Standards:
AISI 304, AISI 316, ASTM A48, ASTM B16, ASTM B62
Overall Width:
6.75 in
Features:
100% Tested, 300 lb Case Working Pressure, Low NPSH, Mechanical Seals, Non-Cavitating, Self-Adjusting Impeller, Shaft Sleeve, Steep Operating Characteristics, Volatile Fluid Handling, Water Flinger
Overall Height:
8.06 in
Seal Type:
Mechanical, O-Ring, Sealless
Series:
T51
Flow Rate @ 15 psi:
Not Applicable
Thermal Overload Protection:
Yes
Flow Rate @ 120 psi:
Not Applicable
Solid Diameter (Maximum):
25 micron
Flow Rate @ 70 psi:
9.6 gpm
Flow Rate @ 80 psi:
9.5 gpm
Intake Type:
NPT
Flow Rate @ 160 psi:
Not Applicable
Horsepower:
1 hp
Minimum Flow Rate:
2 gpm
Electrical Connection Type:
Plug-In
Wetted Material:
Bronze Fitted, Cast Iron
Manufacturer Warranty Length:
1 yr
Discharge Rotation:
90 Degrees Increments
Compatible Discharge Pipe Size:
1 in
Compatible with Media Type:
Water
Case Pressure (Maximum):
300 psi
Maximum RPM:
3,450 RPM
Flow Rate @ 220 psi:
Not Applicable
Maximum Flow Rate:
40 gpm
Number of Stages:
1
Flow Rate @ 240 psi:
Not Applicable
Flow Rate @ 60 psi:
10 gpm
Specific Gravity (Maximum):
1
Flow Rate @ 180 psi:
Not Applicable
Maximum Feet of Head:
700 ft
Flow Rate @ 40 psi:
10.4 gpm
Impeller Design:
Regenerative Turbine
Flow Rate @ 10 psi:
11.1 gpm
Flow Rate @ 140 psi:
Not Applicable
Frequency:
60 Hz
Best Efficiency Head:
130 ft
Flow Rate @ 260 psi:
Not Applicable
Nameplate Voltage:
115/230V AC
Duty Cycle:
Continuous
Flow Rate @ 50 psi:
10.2 gpm
Minimum Media Temperature:
-20 Degrees F
Flow Rate @ 20 psi:
10.8 gpm
Compatible Intake Pipe Size:
1 1/4 in
Flow Rate @ 90 psi:
9.3 gpm
NPSHr:
200 psi
Shut Off Pressure (Maximum):
105 psi
Motor Frame Designation:
56C
Operation:
Manual
Maximum Media Temperature:
300 Degrees F
Flow Rate @ 100 psi:
9.05 gpm
Pump Housing Material:
Cast Iron
Mounting Orientation:
Horizontal, Vertical
Flow Rate @ 200 psi:
Not Applicable
Discharge Type:
NPT
Flow Rate @ 30 psi:
10.6 gpm
Package Quantity:
1
Related Products