AC Gearmotor, 30 rpm, TEFC, 115V - 3M329
DaytonLog in for pricing
(No reviews yet)
Write a Review
Dayton
AC Gearmotor, 30 rpm, TEFC, 115V - 3M329
AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Totally Enclosed Fan-Cooled, Nameplate Speed 30 RPM, Maximum Torque 126 in-lb, Overhung Load Capacity 175 ft-lb, Rotation CW, Output Shaft Height 3.5 in, Mounting Orientation Any Angle, Operating Voltage 115V AC, Inverter Rated No, Gear Ratio 53:1, Brake Type None, Shaft Orientation Parallel, AGMA Gear Class Class 9
- Country of Origin:
- United States
- Item:
- AC Gearmotor
- Gearmotor Type:
- AC Gearmotor
- Motor Type:
- Shaded Pole
- Gearmotor Voltage:
- 115V AC
- Shaft Orientation:
- Parallel
- Enclosure:
- TEFC
- Nameplate RPM:
- 30 RPM
- Gearmotor Shaft Type:
- Single
- Gearmotor Shaft Orientation:
- Parallel
- Voltage:
- 115
- Gearmotor Enclosure:
- Totally Enclosed Fan-Cooled
- Gear Ratio:
- 53
- Gearmotor Phase:
- 1
- Full Load Amps:
- 2.3
- Input HP:
- 1/15 hp
- Gearmotor Rotation:
- CW
- Seals:
- Lip Type on Input and Output Shaft
- Gearmotor Mounting Position:
- All Angle
- Hz:
- 60 Hz
- Overhung Load:
- 175 lb
- Housing:
- Die Cast Aluminum
- Gear Type:
- Helical (1st Stage), Spur (Subsequent Stages)
- Phase:
- Single
- Gear Material:
- Hardened Steel
- RPM Range:
- 16 to 30
- Gearmotor Brake Type:
- None
- Dimension C:
- 8.875 in
- Shaft Length (Dimension V):
- 1.5 in_x000D_
- Gears:
- 1st Stage Helical, AGMA Class 9, Hardened Steel, Subsequent Stages Spur
- Shaft Dia. (Dimension U):
- 5/8 in
- Max. Ambient Temp.:
- 40 Degrees C
- Lubrication:
- Permanent Heavy Duty Gear Oil
- Rotation:
- CW
- Mounting:
- All Position
- Bearings:
- Ball on Motor, Heavy Duty Needle Roller and Thrust Balls on Case
- Thermal Protection:
- None
- Length Less Shaft:
- 8.88 in
- Standards:
- UL Recognized
- Brake:
- Adaptable to 5X400
- Gear Case Material:
- Die Cast Aluminum
- Max. Torque:
- 126 in-lb
- Dimension L:
- 8.063 in
- Number of Brake Discs Required:
- 1
- Overall Length:
- 6.99 in
- Housing Material:
- Die Cast Aluminum
- Overall Height:
- 5.13 in
- Maximum Ambient Temperature:
- 104 Degrees F
- Inverter Rating:
- 53
- Motor Enclosure:
- Totally Enclosed Fan-Cooled
- Mount Hole Center-to-Center Width:
- 4 in
- Nameplate Speed:
- 30 RPM
- Keyway Depth:
- 1 in
- Number of Output Shafts:
- 1
- Full Load Current:
- 2.3 A
- Output Shaft Length:
- 1 1/2 in
- Mount Hole Center-to-Center Length:
- 3 in
- Maximum Torque:
- 126 in-lb
- AGMA Gear Class:
- Class 9
- Output Shaft Height:
- 3.5 in
- Mounting Orientation:
- Any Angle
- Operating Voltage:
- 115V AC
- Inverter Rated:
- No
- Input Horsepower:
- 0.067 hp
- Mount Type:
- Any Position
- Seal Type:
- Lip Type on Input and Output Shaft
- Keyway Width:
- 3/16 in
- Brake Type:
- None
- Overhung Load Capacity:
- 175 ft-lb
- Bearing Type:
- Ball on Motor, Heavy Duty Needle Roller and Thrust Balls on Case
- Frequency:
- 60 Hz
- Output Shaft Diameter:
- 5/8 in
- Package Quantity:
- 1
