AC Gearmotor, 100.0 in-lb Max. Torque, 1 RPM Nameplate RPM, 115V AC Voltage, 1 Phase - 1LNG2
Manufacturer: Dayton
MFR # 1LNG2
Log in for pricing
AC Gearmotor, 100.0 in-lb Max. Torque, 4.5 RPM Nameplate RPM, 115V AC Voltage, 1 Phase - 6Z075
DaytonLog in for pricing
(No reviews yet)
Write a Review
Dayton
AC Gearmotor, 100.0 in-lb Max. Torque, 4.5 RPM Nameplate RPM, 115V AC Voltage, 1 Phase - 6Z075
AC Gearmotor, Number of Output Shafts 1, Motor Type Permanent Split Capacitor, Motor Enclosure Open Air-Over, Nameplate Speed 4.5 RPM, Maximum Torque 100 in-lb, Overhung Load Capacity 90 ft-lb, Rotation CW/CCW, Mounting Orientation Any Angle, Operating Voltage 115V AC, Inverter Rated No, Gear Ratio 361:1, Brake Type None, Shaft Orientation Parallel, Compatible Capacitor Manufacturer Part Number 2MDV3, Application Ball on Motor, Heavy Duty Needle on Case
- Country of Origin:
- United States
- Item:
- AC Gearmotor
- Gearmotor Voltage:
- 115V AC
- Gearmotor Phase:
- 1
- Gearmotor Type:
- AC Gearmotor
- Max. Torque:
- 100 in-lb
- Gearmotor Shaft Type:
- Single
- Gearmotor Shaft Orientation:
- Parallel
- Nameplate RPM:
- 4.5 RPM
- Gearmotor Enclosure:
- Open
- Gearmotor Rotation:
- CW/CCW
- Gearmotor Brake Type:
- None
- Length Less Shaft:
- 7.25 in
- Gearmotor Mounting Position:
- All Angle
- Full Load Amps:
- 0.3
- Standards:
- C-UL Recognized, UL Recognized
- Input HP:
- 1/80 hp
- Hz:
- 60/50 Hz
- Enclosure:
- Open
- Dimension C:
- 8.24 in
- Gears:
- 1st Stage Steel, Helical, Subsequent Stages Steel or Heat Treated Powdered Metal Spur
- RPM Range:
- 0 to 15
- Thermal Protection:
- None
- Dimension X:
- 2.8";Gear Case Material=Die Cast Aluminum"
- Bearings:
- Ball on Motor, Heavy Duty Needle on Case
- Motor Type:
- Permanent Split Capacitor
- Gear Type:
- Helical (1st Stage), Spur (Subsequent Stages)
- Capacitor Required:
- Yes
- Phase:
- Single
- Seals:
- Spring Loaded Lip Type on Input and Output Shaft
- Brake:
- Adaptable to 5X400
- Shaft Dia. (Dimension U):
- 1/2 in
- Gear Ratio:
- 361
- Shaft Length (Dimension V):
- 1";Mounting=All Position"
- Dimension L:
- 3.46";Gear Material=Steel or Heat Treated Powdered Metal"
- Lubrication:
- Permanent Heavy Duty Gear Oil
- Housing:
- Die Cast Aluminum
- Shaft Orientation:
- Parallel
- Rotation:
- CW/CCW
- Overhung Load:
- 90 lb
- Voltage:
- 115
- Max. Ambient Temp.:
- 40 Degrees C
- Application:
- Ball on Motor, Heavy Duty Needle on Case
- Overall Height:
- 3.63 in
- Overall Width:
- 5.31 in
- Housing Material:
- Die Cast Aluminum
- Frequency:
- 50 Hz, 60 Hz
- Seal Type:
- Spring Loaded Lip Type on Input and Output Shaft
- Maximum Torque:
- 100 in-lb
- Nameplate Speed:
- 4.5 RPM
- Mounting Orientation:
- Any Angle
- Full Load Current:
- 0.3 A
- Mount Hole Center-to-Center Length:
- 2.63 in
- Input Horsepower:
- 0.013 hp
- Operating Voltage:
- 115V AC
- Inverter Rating:
- 361
- Keyway Depth:
- 0 in
- Output Shaft Length:
- 1 in
- Overhung Load Capacity:
- 90 ft-lb
- Bearing Type:
- Ball on Motor, Heavy Duty Needle on Case
- Keyway Type:
- Rounded
- Brake Type:
- None
- Motor Enclosure:
- Open Air-Over
- Output Shaft Diameter:
- 1/2 in
- Keyway Width:
- 1/8 mm
- Mount Type:
- Any Position
- Compatible Capacitor Manufacturer Part Number:
- 2MDV3
- Mount Hole Center-to-Center Width:
- 2.63 in
- Maximum Ambient Temperature:
- 104 Degrees F
- Number of Output Shafts:
- 1
- Inverter Rated:
- No
- Package Quantity:
- 1
-
-
AC Gearmotor, 42.0 in-lb Max. Torque, 1 RPM Nameplate RPM, 115V AC Voltage, 1 Phase - 52JE38
Manufacturer: Dayton
MFR # 52JE38
Log in for pricing
-
AC Gearmotor, 100.0 in-lb Max. Torque, 17 RPM Nameplate RPM, 230V AC Voltage, 1 Phase - 1L527
Manufacturer: Dayton
MFR # 1L527
Log in for pricing
-
AC Gearmotor, 500.0 in-lb Max. Torque, 27 RPM Nameplate RPM, 115V AC Voltage, 1 Phase - 6K352
Manufacturer: Dayton
MFR # 6K352
Log in for pricing
